Precitec local:
Select Language:
Search
CHRocodile MPS 2L

CHRocodile MPS 2L


CHRocodile MPS 2L

Precitec has developed a new generation of sensors, the CHRocodile MPS 2L flexible Multi-Point Sensor, offering up to 24 simultaneous and independent non-contact measurements in distance and thickness mode.

Together with the newly developed line probes one can measure two lines of 12 points each. The measuring points are distributed on a line with a length of up to 12.5 mm. Since the channels can be addressed independently, other configurations, such as using one line probe and up to 12 additional point probes can be used.

This enables the possibility to use a line probe with a pitch of 1mm for critical zones of the container, while for the less critical zones a larger pitch of 2 mm or 4mm might be favored. With this great flexibility, together with the small footprint the CHRocodile MPS 2L is particularly suitable for inline inspections of container glass at the hot and cold end.

 

 

Point probe SP 12

The SP 12 is a newly developed single point probe with a measuring range of 12mm. Due to improved optic design it is produces a higher signal to noise ratio and is therefor ideally suited for dark glass. The small footprint allows the integration at low space areas like in production lines.

 

Line probe MP 10,5

The MP 10.5 multipoint probe with 12 Points in a straight line. The pitch between the point of 1.14mm results in a total line length of 12.5mm and allows to measure critical sections with higher resolution. Due to the improved optical design a higher signal to noise ratio can be obtained, making the MP 10.5 the perfect solution for dark glass.

 

Line Probe MP 18

The MP 18 multipoint probe with 12 Points in a straight line. The pitch between the point of 1.14mm results in a total line length of 12.5mm and allows to measure critical sections with higher resolution. The high measuring range and the greater angle of acceptance make the MP 18 an ideal solution for non-round objects. Further the flat design allows to stack multiple probes, such an even longer combined line with less pitch between the single lines can be achieved.

  • Replaces up to 24 individual sensors
  • Robust and maintenance free
  • Measurement of distance and layer thickness along a line
  • Any combination of point and line measuring probes possible
  • Highly efficient probes for colored and dark glasses
    • number of measuring channels: 24
    • measurement/second: 4500 (24 channels); 9000 (10 channels)
    • measuring range: depends on optical probe
    • any combination of point and line probes
    • synchronization with external devices: trigger input, synchronizing output, 5 encoder inputs
    Datasheet Request

    Error: Invalid e-mail address
    Overview
    Measuring Heads
    Measuring Sensors
    Offer Request
    Your contact
    E-Mail: Contact
    © 2019 Precitec Group